AEM 30-0300 X-Series Wideband Gauge A/F AF O2 Air Fuel Ratio comes with Sensor
Description
The UEGO gauge will indicate changes in the air/fuel ratio in real time, which is essential when you aim to perform safer, more powerful and accurate engine tuning.
Specifications:
52mm(2-1/16") Diameter Mounting
Compatible with Vehicle/System Voltages up to 16V
0-5V Analog Output
Serial RS-232 Output
20ms Typical Response
8.0:1 to 20.0:1 AFR / 0.55 to 2.00 Lambda
Configurable 3 or 4 Digit Precision Display Modes
Configurable AFR, Lambda or O2% Display Modes
Free Air or Resistor Trim Calibration Modes
Auto Dimming Feature
Gledewen Wideband UEGO Air Fuel Ratio
Gauge Kit Includes:
1 * UEGO Gauge
1 * Wideband Oxygen Sensor
1 * PWR/IO Cable
1 * Sensor Harness
4 * Butt Connectors
1 * Silver Nut
Usage Steps
1. Connect Harness A to Port A.
2. Connect Harness B to Port B.
3. Connect the other end of Harness B to the sensor.
4. The other end of Harness A has a red wire for the positive terminal and a black wire for the negative terminal.
5. Connect to a 12V power supply. The instrument will start working, with a working voltage of 12V.
6. The dashboard has a setting and selection button, allowing for 8 function switches.
7. In the 4-digit mode, press the left button to switch to the 3-digit mode. Press the select button to confirm, which will change to 3-digit mode. Keep pressing to switch to the initialization mode or air-fuel ratio mode.
8. Change to CAN mode for engine combustion ratio calibration and adjustment. This can increase the combustion ratio and improve engine efficiency.
Tip: Hello, if you have any questions about this product, you can contact the customer service, send the OE number picture of the parts you want to the customer service for inquiry, so as to avoid your purchase of the past is not applicable to your car, so as to refund.
model
$171.65 USD >
Quantity
Guaranteed Safe Checkout
divider